-
Piston profile measuring instrument
Main parameters: maximum workpiece rotation diameter: 380mm/500mm, maximum measurement height: 400mm, maximum measurement depth - use standard probe: 100mm (when the aperture is less than 36mm); Non standard supports can measure up to 300mm (optional with aperture greater than 36mm)
-
Camshaft measuring instrument
Main parameters: radial error, roundness, waviness, and eccentricity error of the camshaft journal; The peach shaped surface lift value, lift error, phase angle, velocity and acceleration curves, base circle runout and other related parameters of the camshaft, as well as the roundness of various circular workpieces (the fully automatic model adds straightness, taper, parallelism, and can also provide measurements of crankshaft roundness, eccentricity, and other parameters according to user requirements)
-
High speed roundness tester for bearings
Main parameters: It can measure the roundness, concentricity, coaxiality, eccentricity, etc. of various regular and irregular circular workpieces. Analysis function: static waviness, dynamic waviness, surface waviness (Wc, Wp, Wv, Wt, Wa, Wq), spectrum analysis, wave height analysis, roundness filtering method: 1-500, 1-250, 1-55 waviness: 3-16, 3-17, 15-500, 17-100
-
Roundness meter
Main parameters: roundness, cylindricity, concentricity, coaxiality (multi element), straightness, verticality (multi element), runout (axial, radial), full runout (axial, radial), flatness (multi element), parallelism (multi element), notch removal, waviness, spectral analysis, wave height analysis, harmonic analysis, diameter, taper (vertical, planar), wall thickness deviation
-
Automatic centering and leveling cylindricity instrument
Main parameters: Common parameters: roundness, cylindricity, concentricity, coaxiality, flatness, parallelism, verticality, eccentricity